Vai al contenuto

2016/2017 PROTOform WCICS


Pupillo

The final round of the 2016/2017 PROTOform WCICS went down in Calgary, Alberta.

RC America / XRAY Canadian team drivers Luke Pittman, Blake Bell, Korgae Scales, Frank Bortolazzo, Earl Towson and Jim Chapman were looking to make an impact. Being the final round of the series it was also time to crown series champions with strong finishes from XRAY including a Championship Sweep in 12th Scale Stock with the X12 taking 1st, 2ndand 3rd!

 

Touring Stock

Touring Stock saw Pittman and Mah battling during qualifying for that top position with Pittman taking the first honors in qualifying round 1 with a 31/5:06 pace.  Wayne Mah, not to be outdone, came out swinging in round 2 and laid down a blistering 31/5:01 to reset TQ.  Being that WCICS changed it format this year to 3 qualifiers with triple/double mains it meant that the final chance to grab TQ was up next in round 3.  Perhaps the most exciting round of the weekend, Mah and Pittman both ran nearly flawless runs with Pittman taking the edge with a final pace of 31/5:00.5 over Mah’s 31/5:00.9.  Each of the two had a fast lap of 9.41 which set the stage for some exciting racing in the mains.  Pittman made a crucial mistake at the start of A3 allowing Mah and a few other cars to get by.  In A2 Pittman led for a couple of laps before some unfortunate contact with Mah causing a body-tuck and sliding him to last.  While Mah ended up winning A2 he also voluntarily removed his result for that main, setting the stage for A3.  In order to get the overall win, Pittman had to take the win with Mah finishing 3rd or worse, which would be a long shot considering Mah’s history.  Pittman held off Mah for the full five minutes of A3 but the second place finish for Mah beat Pittman’s 3rd place finish in A1 thus giving him the overall win.  Not forgotten was Jim Chapman laying down solid runs in all 3 mains for a solid third podium position.

TC Stock Top 5

1.       Wayne Mah

2.       Luke Pittman – XRAY

3.       Jim Chapman – XRAY

4.       Ryan Berry

5.       Lance Radkey

2016/2017 PROTOform WCICS Season Touring Stock Champions:

1.       Wayne Mah

2.       Luke Pittman – XRAY

3.       Ryan Berry

 

 

Touring Modified

In Touring Modified Wayne Mah dominated but not without a strong challenge from XRAY’s Blake Bell.  Bell and Mah traded hotlaps back and forth all weekend but Mah was able to string a few more hotlaps together in the mains to take the overall win.  Bell was close to secure the second podium position and  Pittman, Chapman and Scales were all close in the battle for XRAY as well with Pittman taking two 3rds, Chapman taking a 3rd and 5th and Scales taking a 2nd and a couple DNF.

TC Modified Top 5

1.       Wayne Mah

2.       Blake Bell – XRAY

3.       Luke Pittman – XRAY

4.       Ryan Berry

5.       Jim Chapman – XRAY

2016/2017 PROTOform WCICS Season Touring Modified Champions:

1.       Wayne Mah

2.       Blake Bell – XRAY

3.       Luke Pittman - XRAY

 

12th Scale Stock

In a dominating performance in 12th Scale Stock 13.5, XRAY’s Luke Pittman TQ’d each qualifying round to secure himself the starting position on the grid going into the mains.  Jim Chapman and Earl Towson both had strong showings in qualifying setting the stage for a solid X12 finish.  Pittman was able to cruise to back to back wins in A1 an A2 giving him the overall win and leaving Jim and Earl to continue the battle to represent XRAY.  Ultimately Jim was able to take the second podium position with some very close battles with Tommy Tam and Earl Towson finishing in the fifth position.

12th Scale Stock 13.5 Top 5

1.       Luke Pittman – XRAY

2.       Jim Chapman – XRAY

3.       Tommy Tam

4.       Cal Freeman

5.       Earl Towson – XRAY

2016/2017 PROTOform WCICS Season 12th Scale Stock Champions:

1.       Luke Pittman – XRAY (With a perfect season of 404 points)

2.       Ryan Rice – XRAY

3.       Earl Towson – XRAY

 

Formula 1

In Formula 1 XRAY’s Korgae Scales set TQ in round 1 which held through until the mains.  In A1 Korgae went tone to tone to take the win, setting himself up for a solid finish.  A2 was a different story though with Ed Mardones edging out Scales by 3 seconds to take the win and giving Korgae a second which would put the final results in the finishing order of A3.  Korgae Scales once again repeated his tone to tone performance in A3 staying ahead of Mardones by 2.5 seconds at the finish line, giving him the overall win for the weekend.

Formula 1 Top 5

1.       Korgae Scales – XRAY

2.       Ed Mardones

3.       Cal Freeman

4.       Steve Wiens

5.       Edmond Lee

2016/2017 PROTOform WCICS Season Formula 1 Champions:

1.       Korgae Scales – XRAY (With a perfect season of 404 points)

2.       Edmond Lee

3.       Alex Pate

 

V (5).jpgV (6).jpgV (1) (10).jpgV (2) (4).jpgV (3) (2).jpgV (4) (1).jpg


  Report Article



Feedback utente

Commenti raccomandati

Non ci sono commenti da visualizzare.


  • Ultime dal forum

    • Buongiorno a tutti, sono un ex modellista a cui è tornata la scimmia 😄 Ho corso per 8 anni a livello agonistico con 1/8 Off-road nitro, poi ho abbandonato l'hobby e ora, dopo circa 10 anni, volevo riprendere a fare qualche garetta. Nella mia zona (Vicenza) alcuni amici sono passati nel frattempo al GT 1/8 BLS e mi sto approcciando all'acquisto del modello. Mi sono un pò arenato su un argomento: ho notato che le 1/8 GT BLS di ultimissima generazione sono prive di differenziale centrale, mentre quelle dei miei amici che hanno un paio d'anni hanno ancora i 3 differenziali... Adoperando io l'auto prevalentemente per le famose "gare di sagra", improvvisate su piazzali e quindi molto tortuose e con rettilinei limitati, ho il timore che possa essere penalizzante l'assenza del differenziale centrale. Mi conviene prendere il penultimo modello con differenziale centrale? Se qualcuno ha esperienza in merito e mi può dare consigli gliene sarei grato   Ciao a tutti
    • Vorrei un informazione riguardo una cassttina avviamento hudy posso mettere batterie 2 lipo da 3s fornando una 6s? Lo supporta il motore?
    • Per essere sempre al passo con i tempi, abbiamo creato una community whatsapp, con l’obiettivo di rimanere più connessi e consentire quindi un’informazione più veloce possibile.   Entra subito cliccando su https://chat.whatsapp.com/B7qgZ3vy1GoBuFgoZVRsHv  
    • Salve vorrei aprire una pista a Roma si off road 1/8 che una on road 1/10 quanto deve essere grande il campo ?
    • scusami ma....avresti potuto aprire una discussione ad hoc ma vabbe! evidentemente e' molto duro di accoppiamento sto motore ma potrebbe anche essere poco potente l'avviatore o scarica la batteria dello stesso,oppure lo hai ingrassato troppo di carburazione e con troppa miscela incombusta il pistone viene frenato tipo blocco idraulico e complice la conicita' dell'accoppiamento si blocca al punto morto superiore,in ogni caso potresti fare in modo che il gruppo carter,cilindro e pistone sia caldo prima di avviarlo, puoi' usare o una pistola termica hobbistica o anche un buon asciugacapelli che scalda per bene ,devi scaldare la zona tra carter e testa ,con la pistola termica poco anche venti secondi occhio che la pistola termica arriva a centinaia di gradi ,mentre con l'asciugacapelli qualche minuto anche tre di continuo e poi ,col pistone sceso in basso metti in moto e lascia il minimo allegro almeno il primo pieno,poi a seconda del rodaggio che decidi di fare continui il secondo pieno a terra e cosi' via,ogni volta che lo spegni accertati di scendere il pistone in basso durante il raffreddamento,cosi' a grandi linee,se cerchi nel forum ci sono tante discussioni riguardo rodaggi e complicazioni in merito.   ciao
×
×
  • Crea Nuovo...